Press Release (UNEDITED): LOS ANGELES, CA – August 14, 2026 – Diamond Audio, a premier leader in high-performance mobile, marine, and motorcycle audio, announced today the launch of its all-new NEO Series DSP Amplifiers — a four-model lineup of multi-channel and monoblock Class D amplifiers engineered for riders and drivers who demand studio-quality precision without sacrificing space, weatherproofing, or ease of use.
Built from the ground up for the modern audiophile and motorcycle enthusiast, the NEO-DSP Series packs a full 31-band parametric EQ, onboard crossovers, time delay, and channel linking into a compact, Marine Ready, water-resistant chassis — solving the two biggest headaches in custom audio builds: limited real estate and unforgiving conditions.
Power Density, Engineered for the Open Road
Diamond Audio went back to the drawing board to design an amplifier platform that doesn’t flinch when exposed to the elements or squeezed into the tight confines of a saddlebag or console. The result is a masterclass in power density — full studio-grade DSP tuning wrapped in a housing tough enough for the open road, and smart enough to handle the electrical demands of a modern EV or a factory head unit alike.
The NEO Series DSP Amplifier Lineup
- NEO12004DSP – 4-Channel Class D DSP Amplifier (1200 Watts) 300W x4 @ 2 Ohm / 150W x4 @ 4 Ohm, bridged 2 x 600W @ 4 Ohm
- NEO10001DSP – Monoblock Class D DSP Amplifier (1000 Watts) 800W x1 @ 2 Ohm / 600W x1 @ 4 Ohm
- NEO15006DSP – 6-Channel Class D DSP Amplifier (1500 Watts) 250W x6 @ 2 Ohm / 150W x6 @ 4 Ohm, bridged 3 x 500W @ 4 Ohm
- NEO20001DSP – Monoblock Class D DSP Amplifier (2000 Watts) 1600W x1 @ 2 Ohm / 1200W x1 @ 4 Ohm
All four models share a common design DNA: ultra-low distortion (≤ 0.05% THD), staggered RCA connections for cleaner installs, over molded speaker connectors that can’t pull out, a high-current quick-connect removable power block, and 2 RCA DSP-controlled preamp outputs for easy system expansion.
Total Wireless Control — Right From Your Phone
Perhaps the biggest leap forward for the NEO-DSP Series is how riders and drivers interact with it. Every amplifier in the lineup is fully programmable wirelessly through a free companion app for both Android and Apple iOS devices, putting the entire DSP suite — EQ, crossovers, time delay, channel linking, and system configuration — in the palm of your hand, with no laptop or toolbox required.
Talking points for the wireless experience include:
- App-based tuning from any Android or Apple device — adjust the full 31-band parametric EQ, high-pass/low-pass crossovers, slopes, and channel gains right from a phone, trackside or curbside.
- Direct music streaming to the amplifier — the same wireless connection that powers tuning also lets riders stream music straight from their Android or Apple device to the amp, turning a phone into a true all-in-one source and command center.
- Walk-up convenience — no dash-mounted controller required for basic adjustments; riders can fine-tune their system from a phone before a ride or on the fly.
- NEODRC1 Diamond Remote Commander compatible (sold separately) for riders who want dedicated hardware control in addition to the app.
- PC software support is also included for installers and enthusiasts who want deep, desktop-level tuning control during setup.
This combination of pro-level tuning and phone-first convenience is designed to make the NEO-DSP Series as easy to live with day-to-day as it is powerful on paper.
Built for Real-World Installs
Easy OEM integration was a top priority throughout development. The NEO-DSP Series accepts signal inputs up to 20V (high/low level: 20V–0.4V), includes selectable onboard load resistors (10Ω, 20Ω, 60Ω, 20kΩ), and is EV friendly with voltage compatibility from 8–17V. VOX or DC offset auto turn-on rounds out a feature set built to drop into virtually any factory or aftermarket system without complicated workarounds.
“With the NEO-DSP Series, we set out to build the amplifier platform our dealers and customers have been asking for — full studio-grade DSP, real weatherproofing, and total wireless control, all in a footprint that finally respects how little room riders actually have to work with,” said John Catalano, Director of Product Development at Diamond Audio. “Being able to tune your system — or just stream a playlist — straight from your phone is the kind of no-compromise convenience that defines this series.”
Availability
The Diamond Audio NEO Series DSP Amplifiers (NEO12004DSP, NEO10001DSP, NEO15006DSP, and NEO20001DSP) are available now through authorized Diamond Audio dealers. For complete technical specifications or to find a dealer, visit diamondaudio.com or email [email protected].
About Diamond Audio
Diamond Audio has been designing high-performance audio solutions for over 40 years. Known for legendary sound quality, relentless innovation, and trend-setting designs, Diamond Audio remains the trusted name in mobile, marine, and motorcycle audio systems.
