Massive Intros New Powered Subwoofers

share on:
massive audio enclosed subwoofer

Press Release: Massive Audio, of Southern California, is happy to announce the release of the Massive Audio BAS6 and BAS8; 6.5” and 8″ Powered Cast Basket Subwoofers pre-installed within an industrial grade carpeted ported enclosure.

The pre-loaded subwoofers are conservatively rated to handle 250w and 400w RMS, yet efficient enough to yield a high Sound Pressure Levels. They use high temperature 4 layer voice coils and incorporate tight red stitching that is sewn through a Kevlar fiber-enhanced non-pressed paper cone with an EROM foam surround.

The critical function of keeping the voice coil centered in the magnetic gap is performed by triple black poly cotton spiders with mirror image layout and woven round tinsel leads. The enclosure is equipped with quick disconnect 4 AWG Power, REM and ground terminals allowing you to remove the box quickly when extra cargo space is needed. Their enclosure utilizes deep heavy duty black anodized steel grills to protect the cone as well allowing for maximum X-max. A clipping LED is used to protect the entire system.

These subwoofers are powered by a high-performance built-in amplifier with (ATO) Auto Turn-On, Audio Sensing and Remote Trigger. The built-in Hi-Low converter allows you to connect directly from your system without the need of an additional module and its associated cost. Another unique feature is the inclusion of a Remote Bass control with adjustments up to 12db @ 45Hz. Additionally, there are adjustment controls for Low Pass with built-In 12dB Octave Butterworth Crossover, Bass Boost, Phase to 180°.

FEATURES INCLUDE:

  • Die Cast Basket Subwoofer with Black Textured Finish
  • Kevlar Fiber Enhanced Non-Pressed Paper Cone with Textured Paint Finish
  • EROM Foam Surround with Red Stitching
  • Heavy Duty 4-Layer Hi-Temp Voice Coils
  • Fiberglass Woven Dust Cap
  • Double Stacked High Energy Magnets
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Customized Rubber Gasket and Magnet Boot
  • Triple Black Poly Cotton Spiders with Mirror Image Layout
  • Black Anodized Deep Steel Grill
  • High Power / High Temperature Black Anodized Former
  • Quick Disconnect 4 AWG PWR / GND / REM Terminals
  • Low Pass Control with Built-In 12dB Octave Butterworth Crossover
  • Phase Control ~ 0° – 180°
  • Clip LED Indicator
  • Bass Boost from 0dB ~ +12dB @45Hz
  • Remote Gain Control
  • High Quality Industrial Grade Carpet Ported Enclosure

 

MSRP BAS6 – $259.99 BAS8 – $299.99
Size 6.5″ 8″
Watts RMS 250w 400w
Cone Kevlar Fiber Non-Pressed Paper Kevlar Fiber Enhanced Paper
Voice Coil 1.5″ 2″
Surround EROM Foam EROM Foam
Magnet Double Stacked 55oz Double Stacked 90oz
Terminals Quick Disconnect Quick Disconnect
Basket Heavy Gauge Cast Aluminum Heavy Gauge Cast Aluminum
Tinsel Leads Heavy Duty Triple Heavy Duty Triple
X-Max 10mm (1-way) 11mm (1-way)
Crossover Control Variable 50Hz ~ 200Hz / 12dB Variable 50Hz ~ 200Hz / 12dB
Bass Boost 0 ~ -12dB @45Hz 0 ~ -12dB @45Hz
Frequency Response 25Hz ~ 200Hz 25Hz ~ 200Hz
Input Sensitivity 200mV ~ 10V 200mV ~ 10V
Dimensions 14″ x 9″ x 10.6″ 17.1″ x 11″ x 10.6″
Bass Remote Included Included

 

For more information contact [email protected] or visit http://www.massiveaudio.com

share on: