Press Release (edited) STILLWATER, OK–Kicker is shipping its full 2019 CX-Series amplifier line, designed with more power and greater installation flexibility. It comes with hardware for space-saving vertical mounting.
Adding an 800- and 400-watt option to the CXA mono amp mix, all four bass amps are now one-ohm stable to increase system wiring flexibility. The amplifiers also include a full-range, RCA pass-through for easy system expansion, as well as KickEQ™ 6dB variable bass boost, 12dB crossover and a 24dB subsonic filter. The amps are compatible with the CXARC Remote Bass Control to allow easy control from the front of the vehicle while driving.
Each speaker output is stable down to two ohms, and includes a 12dB crossover. Like the mono models, the bass channel on the CXA660.5 includes a 24dB subsonic filter and is compatible with the CXARC remote.
The amplifiers use FIT+™ (Fail-safe Integration Technology-PLUS) for a flexible, noise-free signal. They now accept input voltages ranging from as little as 250 millivolts to as much as 40 volts, ensuring the amplifiers will work with virtually any factory or aftermarket radio without the additional expense of a line-out converter. A three-second turn-on/turn-off delay is also standard.
KICKER CXA.1 Mono Amplifiers Specifications
Models (at 14.4V) CXA1800.1 CXA1200.1 CXA800.1 CXA400.1
Class D Power (watts/ch), 1 Ohm mono 1800 x 1 +/-10% 1200 x 1 +/-10% 800 x 1 400 x 1
Class D Power (watts/ch), 2 Ohm mono 1800 x 1 1200 x 1 600 x 1 300 x 1
Class D Power (watts/ch), 4 Ohm mono 900 x 1 600 x 1 300 x 1 150 x 1
Length (in./cm) 14-3/8, 36.4 12, 30.6 8-1/8, 20.6 8-1/8, 20.6
Width (in./cm) 6-3/4, 17 6-3/4, 17 6-3/4, 17 6-3/4, 17
Height (in./cm) 2-3/8, 5.9 2-3/8, 5.9 2-3/8, 5.9 2-3/8, 5.9
Common to All Models
Frequency Response: 25-200Hz
Signal to Noise Ratio: >95dB
Input Sensitivity: High Level 1V-40V, Low Level 250mV-10V
Crossover: Low-pass (variable) 50-200Hz @12dB/octave
Subsonic Filter: 24dB/octave, High-Pass fixed @ 25Hz
KickEQ™ Bass Boost (end panel): Variable 0-6dB, centered @ 40Hz
CXARC Remote Control available on all models
-Series Multi-Channel Amplifiers Specifications
Models (at 14.4V) CXA660.5 4-Ch. with Sub Ch. CXA360.4 4-Channel
Class D Power (watts/ch) 2 Ohm stereo 90×4 90×4
Class D Power (watts/ch) 4 Ohm stereo 65×4 65×4
Class D Power (watts/ch) 4 Ohm bridged mono 180×2 180×2
Class D Power (watts/ch) 2 Ohm mono channel 300×1 NA
Class D Power (watts/ch) 4 Ohm mono channel 150×1 NA
Sub Channel Crossover Low (Variable) 50-200Hz @12dB/octave NA
Active Crossover Type Amp 1-2: High-pass Hi/Lo/Off
Active Crossover Response Variable 10-200Hz @12dB/octave Variable 50-200Hz @ 12dB/octave
Signal-to-Noise Ratio >90dB >95dB
Length (in./cm) 14-1/8, 35.7 12-1/2, 31.7
Width (in./cm) 6-3/4, 17 6-3/4, 17
Height (in./cm) 2-3/8, 5.9 2-3/8, 5.9
Common to Both Models
Frequency Response: full range 10-20kHz (CXA.5 sub ch. 25-200Hz), +0/-1dB
Input Sensitivity: High Level 1V-40V, Low Level 250mV-10V
Subsonic Filter: 24db/octave, High-Pass fixed @ 25Hz (CXA.5 sub channel only)
KickEQ™ Bass Boost (end panel): Variable 0-6dB, centered @ 40Hz (CXA.5 sub channel only)
CXARC Remote Control capable
For more information visit www.kicker.com/2019-CX-amplifiers